French Drags
French drags are somewhat the equivalent of the plane in carpentry. They are used for soft stones and consist of blades set at alternating angles, between 15 and 30 degrees, over the length of a block of wood. The blades are toothed to provide even removal of surface material. Some drags can be fitted with specially shaped blades to follow convex surfaces. It is important to always run a drag towards the center of a block and never out across an edge. These tools are especially useful for final preparation of large surfaces
All dimensions given are nominal. This particularly applies to those tools which are made by hand. We reserve the right to alter the specification of any products without notification.
If you can not find the item you are looking for then e-mail us at [email protected]
Concave - French Drag Professional 25mm Concave
Concave - French Drag Professional 25mm Concave
£106.62
Convex - French Drag Professional 25mm & 50mm Convex
Convex - French Drag Professional 25mm & 50mm Convex
£90.07
Flat - French Drag Professional 40mm to 80mm Flat Teeth
Flat - French Drag Professional 40mm - 80mm Flat (With Teeth)
£96.00
Plane - NEW French Drag Professional - Flat PLAIN
Plain - NEW French Drag Professional - Flat PLAIN
£115.92
