Shaped Galvanised Strapping 2.5mm Thick - Joist and Timber Metalwork Products Galvanised Strapping - Avery Knight & Bowlers | Online Store

Shaped Galvanised Strapping 2.5mm Thick

Shaped Galvanised Strapping These straps are approximately 30mm wide and come in various lengths and bent ends. The Standard, 2.5mm thick version, is to provide vertical restraint against wind pressure and uplift forces. The straps are manufactured from pre-galvanised steel strips with zinc coated edges Hole diameters are 6mm and they are holed at 12.5mm spacings and grouped in 3's diagonally across the width of the strap The installation of restraint straps must comply with the current Building Regulations, British Standards BS 5628 : Part 1 and Part 3 and BS 8103 : Part 1, as well as NHBC recommendations. When straps are being fixed across joists or trussed rafters which are parallel with the wall, and where there is a gap between the wall and the first joist or truss, the gap must be packed. Noggins must be provided between each joist or truss. Fixing for M305 and Standard Straps: use either No 12 x 50mm wood screws or 4.00 dia x 75mm corrosion resistant nails. For stainless steel straps, stainless steel fixings must be used.
Code	Bat Straps - Bent
Prices from:	£1.97 inc VAT
Note: International (non EU) customers - 20% Tax will be deducted from all prices at the checkout